Sensonic 4000
ATTENTION !
ALL BANKS
WILL BE
ERASED
ENTER
- YES
- leaves the screen without erasing
BANKS
ENTER
- erases all
BANKS
6.10
Data-Logger
A data-logger is a instrument that measures variables that have been converted to an electrical signal and
stores them for later evaluation.
The inclusion of analogue inputs as shown below and the possibility of storing these results enables the
Sensonic 4000
to operate as a data-logger as well.
The analyser is fitted with the following inputs:
two currents or voltages (V / mA)
two thermocouples (Ni-CrNi / Pt-RhPt / Fe-CuNi)
two resistance thermometers (Pt100 / Pt500)
The signals registered by the analogue inputs can either be read from the
DATA
screen or be stored
continuously in a bank.
The
WINFGA
software can then be used for further treatment f these results.
The ground (GND) of all analogue inputs is connected to the instrument
ground.
6.11
Printer
6.11.1
Printing the contents of a screen
This is not possible for the screen
(D1)
. A screen may not be printed whilst data is being entered using the
alphanumeric keyboard until this activity has been ended.
- prints the contents of a screen
6.11.2
Printing of all results
DATA
- open the first results screen
(D1)
- start a print-out containing all measured results
If the current values are displayed they will be printed; if the averaged values are displayed then these will
be
printed.
PAPER
- transports the paper
42
