Madur Sensonic 4000, Руководство пользователя

Страница: 29 / 53

Sensonic 4000 OPERATION
 DEVICE INFO
SERIAL NO.: 20123014
SERVICE...: 18.01.94
OPER. TIME: 670 h
SERVICE IN: 130 h
GAS FLOW : 90 l/h
BATTERY...: 12.65 V
BAT.CAP. : 75 %
FGA LICENCE: YES
The DEVICE INFO screen shows the serial no. of the instrument, the date of the last service, the operating
time, the time until the next service, the speed of the sucked flue gas , the battery charge, the battery
capacity and whether or not the communication with the WINFGA software is locked.
6.8.2 Sensors
select the option SENSORS from the screen OPTIONS as follows:

and

- move the cursor to SENSORS

- select the option. The following screen appears
 SENSORS
1
CO CELL RANGE
1000
2
CALIBRATION O2

3
ANALOGUE INPUTS 
4
SENSOR CALIBRATION 
5
SENSOR INSTALL.

6.8.2.1 Auto-Calibration O2
To increase the accuracy of the O
2
sensor during measurements over a longer period of time the Sensonic
4000 allows to calibrate the sensor with ambient air.
Take the probe out of the stack !

and

- move the cursor to CALIBRATION O2

- select the option. The following screen appears