©Copyright LOTRONIC 2018
MAD-LPRETRO-MKII
3
from the vinyl or AUX input.
: play previous track
: Play next track
MODE: Short press to cycle between USB/SD & BT
: Short press to play or pause. Long press to delete the current music. In REC mode, press to stop recording.
BT control:
When the tone arm is in rest position, the Bluetooth function is selected automatically until you press the MODE
button to change between USB/SD and BT.
Remarks
：
If a USB stick or an SD card was already inserted when the unit is switched on, the music from USB or SD card
will be played automatically. Press the Mode button if you wish to change into Bluetooth mode.
To delete the current music from USB or SD card, keep the Play/Pause button pressed until the music stops
playing.
When playing a vinyl disk, keep the MODE button pressed for at least 3 seconds to start recording. Press the
Play/Pause button to stop recording.
To play the recorded file, put the tonearm back to the armrest. The music will be played automatically from USB
or SD card. Then press Mode button again, the recorded file will be played.
ATTACHING THE LEGS
The turntable comes with its own legs so it can stand alone. Alternatively, the legs
can be removed and it can be placed on an existing table or shelf.
To attach the legs to the turntable, screw each individual leg to the metal plate on
the rear of the unit. See diagram below for more details.
NOTE
: If placing the turntable on a surface, attach the included rubber feet.
POWER CONNECTION
Connect the supplied DC power adapter to the DC socket (13) on the rear panel and the other end into an
appropriate mains outlet.
AMPLIFIER CONNECTION
Connect audio plugs to the input on your mixer or amplifier:
Red plug into right channel input.
White plug into left channel input.
Playing a record
1.
Open the latches on the side of the unit and lift up the id. Make sure that the arm support is secured.
2.
Remove the protective cover from the stylus cartridge.
3.
Place the record of your choice on the turntable. If it is a 45rpm, do not forget to place the adaptor on
the record spindle.
4.
Choose the desired playing speed using the Speed select switch between 33.3, 45 and 78rpm.
5.
Turn on the rotary power switch of the turntable. Please note that this button also controls the volume.
6.
Release the tone arm lock.
