pHTemp2000
6
Connecting and Starting the data logger
1.
Once the software is installed and running, plug the interface cable into the data logger.
2.
Connect the USB end of the interface cable into an open USB port on the computer.
3.
The device will appear in the Connected Devices list, highlight the desired data logger.
4.
For most applications, select “
Custom Start
” from the menu bar and choose the desired
start method, reading rate and other parameters appropriate for the data logging
application and click “
Start
”. (“
Quick Start
” applies the most recent custom start options,
“
Batch Start
” is used for managing multiple loggers at once, “
Real Time Start
” stores the
dataset as it records while connected to the logger.)
5.
The status of the device will change to “
Running
”, “
Waiting to Start
” or “
Waiting to
Manual Start
”, depending upon your start method.
6.
Disconnect the data logger from the interface cable and place it in the environment to
measure.
Note: The device will stop recording data when the end of memory is reached or the device is stopped. At this point the
device cannot be restarted until it has been re-armed by the computer.
Downloading data from a data logger
1.
Connect the logger to the interface cable.
2.
Highlight the data logger in the Connected Devices list. Click “
Stop
” on the menu bar.
3.
Once the data logger is stopped, with the logger highlighted, click “
Download
”. You
will be prompted to name your report.
4.
Downloading will offload and save all the recorded data to the PC.
Computer Interface
Fully insert the male connector of the IFC200 interface cable into the female receptacle of
the data logger. Fully insert the female USB connector into the USB. (Please see the Data
Logger Software manual for further information.)
*WARNING: Install driver before connecting a device using a USB for the first time. See the
Software manual for further information.
