12
Fig 24
Fig 25
4.6 Pull up the Starting Handle gently until resistance is felt, then pull it up rapidly.
Put back the handle slowly to avoid damage to the starting system. Turn the
key-switch to START position for E-start Models, for details please consult Chapter
8.(Figure 25)
4.7 If the engine fails to start, please turn on the choke lever and repeat what you
do in Section 4.6.
WARNING
After the engine started, release the starting handle gently to
avoid personal injury and/or equipment damage due to the bouncing back.
4.8 Once the engine is started, set the choke lever to ON position. (Figure 26)
Fig 26
Fig 26
