MADER HHGT-001B, Руководство пользователя

Страница: 86 / 101

• Slide the belt free of engine pulleys and
reverse belt guides.
• Pull belt down and away from
transmission pulley.
-
Install new reverse belt:
• Thread belt up from bottom.
• Place belt around transmission pulley in
groove.
• Place belt under reverse belt guides
• Gently pull engine recoil rope while
forcing the belt over the edge of the
engine pulley into the Vgroove.
-
Install new forward belt:
• Place forward belt in transmission pulley groove.
• Gently pull the engine recoil rope to rotate the pulley while forcing the forward
belt into the V-groove.
4. Replace belt guard.
5. Attach spark plug wire.
ENGINE MAINTENANCE
Refer to the engine manual included in your parts packet for information on engine maintenance.
Your engine manual provides detailed information and a maintenance schedule for performing the
following tasks:
1. Check oil level before each use or after every 8 hours of operation.
2. Change oil after first 5-8 hours of operation. Change oil while engine is warm. Refill with
new oil of recommended grade.
3. Check spark plug yearly or every 100 hours of operation.
4. Service air cleaner.
5. Keep engine and parts clean.
6. Check engine and equipment often for loose nuts and bolts, keep these items tightened.
CHECK OR FILL THE ENGINE CRANKCASE
1. Add oil according to engine manual. Do not overfill. Use a clean, high quality detergent oil.
Do not mix oil with gasoline. Oil level must be full. Check the oil level by removing oil fill
plug. Oil level should be up to the bottom of the fill plug opening.
2. Always check oil level before starting engine. Refer to engine manual for capacity and type
of oil to use.
IMPORTANT!
Engine is shipped from factory without oil. You must add engine oil before starting
engine.
86