THE NAMES OF EACH COMPONENT
(1) Tank
(8) Choke
(2) Exhaust muffler
(9) Pipe-like frame
(3) Grounding
(10) Fuel tap
(4) AC socket
(11) Tank cap
(5) Oil stick (12) Circuit breaker
(6) Starter
(13) Spark plug
(7) Cold start device (14) Switch
CHECKING BEFORE OPERATION
1. The place of the lubricant.
Note: Make sure engine is stopped in the horizontal plane when checking the
generator.
2. Insert the stick into the joints. If the oil-place is below the prescribed minimum, it’s
unnecessary to turn the stick.
3. Fill enough lubricant to the prescribed maximum of the oil place.
4. Fix the stick firmly.
THE FUEL PLACE
1. Remove the tank cap.
2. Check the fuel place. If the place is below the prescribed, please fill the petrol.
3. Fill enough petrol to the shoulder of the petrol filter.
4. Outfit the tank cap.
06
05