53
ENGLISH
GB
Connect the cable to the termi-
nal as follows:
L Brown
N Blue
Yellow/Green
5
Install the RF receiver of the
remote unit at its opening on
the cover
2
.
8
Install the five blades
1
to the
motor of the fan unit
5
by use
of three screws per blade.
11
Install the luminaire cover
3
and check it for secure fitting.
14
Slide the remote unit into the
ceiling bracket as shown.
7
Install the cover
2
of the fan
unit
5
by attaching it to the
ceiling bracket and reinstall
the screws removed in step 2.
10
Fit lamps (E27 / max. 46 W /
not included) to the two sock-
ets of the luminaire base
4
.
13
At the installation site, fix ade-
quate wall anchors (not includ-
ed) to the ceiling.
3
Switch off the circuit breaker
of the installation site.
1
Hang the fan unit
5
into the
ceiling bracket. Rotate the fan
unit
5
until the rotation latch
engages.
6
Connect the two cable clips of
the remote unit with the cor-
responding clips on the fan
unit
5
.
9
Connect the cable clip of the
fan unit
5
with the clip on the
luminaire base
4
and install
the luminaire base
4
to the fan
unit
5
using its three screws.
12
Switch on the circuit breaker
of the installation site.
15
Install the ceiling bracket with
the screw kit. Make sure the
ceiling bracket is securely fas-
tened.
4
Remove the right screw
of the
ceiling bracket screws
6
on
both sides. Keep them for step
10.
2
WARNING!
Wall anchors must fit the ceiling type, the
weight of the fan, and its torque.
Содержание 4306517344955
Страница 56: ......
