training the coin acceptor
The built-in coin acceptor detects inserted coins and sorts them by
diameter and thickness of the coin. To train the coin acceptor, a sample
coin must be placed in the coin acceptor. The coin acceptor is located
inside the machine directly behind the insertion slot.
By pushing out the 2 yellow retaining clips, the entire coin acceptor can be
clicked out of the metal holder for easier access.
Now slide the coin holder up with
your thumb and place a coin under the coin holder slide (see image).
Then slowly let the coin holder slide clamp back onto the inserted coin.
The diameter of the coins inserted is now checked against the sample
coin just inserted.
then the thickness of the coin must be set. Place a coin in the insertion
slot and check whether it falls through to the machine. If the coin gets
stuck, the thickness of the coin acceptor is set too thin. Move the red
slider (photo) to the right to allow thicker coins.
for more detailed instructions see the video explanation on the website of
madeforarcade.com or madeforarcade.nl
operating the machine
Depending on the position of the agility button, the machine will automatically move the coin platform up and
down after switching on, or the platform will remain stationary and wait for a coin insert.
made for arcade Nederland - 2022
view more current information at
of
6
