GU_NADIR_V_3_20_EN
15 / 20
In " PHASE IDENTIFICATION " mode :
•
Connect the « MADE-FLEX » (Rogowski coil) Transducer to the Receiver
The Receiver differentiates automatically between Transducers.
Note : Do not put this Transducer around the cable or the screen, only the Phase to be
measured, or only the Neutral of the feeder, depending on the Transmitter connection.
•
Close the « MADE-FLEX » coil.
The menus SEARCH or IDENTIFICATION are used as above :
As an indication, the minimum levels observed should be between 30 % and 100 %
(depending on the network and loads). On the "
wrong
" cables, the signal is < 10 %.
BATTERY CHARGE screen :
Navigation through the MENUS :
•
Start the Receiver with : ON
•
Press : SCROLL
To change screens, press SCROLL and to enter the screens press VALID.
The little arrow indicates the ACTIVE LINE.
According to the arrow direction, one can modify the LINE or leave it.
Turn off the NADIR Receiver with the OFF button.
BATTERY CHARGE
100 %
