gu_gas_tracker2_v_2_15_en
17 / 35
All detected databases appear in the list, they are identified by their hardware address in
the following format XX: XX: XX: XX: XX: XX).
Then press SET AS DEFAULT button if you wait to set the selected base as default.
Then press CONNECTION
5.1.4.
Initial settings
First choose the Noise level mode (estimated ambiant noise level).
MODES
There are 4 MODES corresponding to 4 levels of noise
Low
Medium
High (default)
Extreme
The Mode selection directly impacts the acquisition time; the higher the noise level, the greater
the acquisition time in order to avoid induced acoustic perturbations. This choice is not definitive
because at any time, this parameter can be changed simply by activating the MODE selection
drop-down list at the top left of the measurement window.
5.1.5.
Measurements
Once the MODE is selected, the measurement window appears fully; you can start the
measurements.
