Page 6
For technical questions, please call 1-888-866-5797.
Item 56803
9. Release the vacuum in the Vacuum
Pump with the Vacuum Release Valve.
Then, disconnect the Brake Bleed
Screw Adapter from the vehicle’s
brake caliper bleed screw.
Note:
Do not allow the cup to fill completely
with brake fluid. When necessary, release
the vacuum in the tool and empty its Cup
of old brake fluid. To assist in transport,
this set includes a Transport Lid (2b)
without hose connections.
After the brake fluid is disposed of
properly, resume bleeding the brakes.
10. Remove the cap from the vehicle’s
master cylinder, and refill the master
cylinder back to its normal capacity
with clean, new brake fluid. Then,
replace the cap on the master cylinder.
11. Proceed to the vehicle’s next
brake caliper, and perform the
same steps as above.
12. When finished using the Vacuum Pump,
clean the tool and store it in a clean,
dry location out of reach of children.
13.
WARNING! Before driving the
vehicle, carefully check for leaks
and test for proper brake operation.
Automatic Brake Fluid Refilling
1. To keep a consistent level of clean,
new brake fluid in the master cylinder
when vacuum bleeding, start by
removing old fluid from master cylinder.
2. Replace cap on a 12 oz. or 32 oz.
bottle of fresh brake fluid with
appropriate Bottle Adapter (15, 16).
3. Place appropriate Master Cylinder Plate
(17, 18, or 19) on top of master cylinder.
4. Turn bottle of brake fluid upside down
carefully to prevent spilling, insert Bottle
Adapter into hole in Master Cylinder
Plate, and push down on bottle to
secure Bottle Adapter in Plate.
5. Bleed the hydraulic brake system.
Maintenance and Servicing
1.
Before each use:
Inspect the general
condition of the Vacuum Pump.
Check for misalignment or binding of
moving parts, cracked or broken parts,
damaged Hoses, loose connections,
and any other condition that may
affect its safe operation. If a problem
occurs, have the problem
corrected before further use.
Do not use damaged equipment.
2.
When cleaning:
Do not clean the
Vacuum Pump with cleaners or other
solvents. Use a clean, dry cloth.
Do not immerse the Vacuum
Pump in any liquid.
3.
When storing:
Do not store fluid
in the Cup. Dispose of excess
fluid properly, according to federal,
state, and local guidelines.
Store the Vacuum Pump in a clean,
dry location out of reach of children.
4.
WARNING! All maintenance,
service, or repairs not listed in this
manual are only to be attempted
by a qualified service technician
.
