Page 4
For technical questions, please call 1-888-866-5797.
Item 58391
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product
.
Note:
Applications and operating
procedures can differ depending on the
make and model of vehicle. A generalized
description of procedures is as follows:
1. Remove the wheel from the vehicle.
2. Refer to vehicle’s service and repair
manual to remove outer tie rods.
3. Place Sleeve (2) onto Socket
(1) and align notches.
4. Place correct size Crowfoot
onto inner tie rod.
5. Hold on to Crowfoot while sliding
Socket over inner tie rod. When
socket engages with crowfoot,
rotate Sleeve to lock in Crowfoot.
6. Bend locking tab on inner tie rod fitting
so that inner tie rod can be removed.
7. Insert appropriate tool into 1/2” drive
and turn Socket counterclockwise
to remove inner tie rod.
8. Refer to vehicle’s service
and repair manual to replace
inner and outer tie rod.
Note:
Have the wheels aligned
by a qualified technician.
