MADDALENA ElecTo SONIC, Инструкция по установке, использованию и техническому обслуживанию

Страница: 4 / 20

4
1.2 Restrictions
d
PROHIBITED
– Modify and/or attempt to repair the
product. All repairs must be per-
formed exclusively by authorised
personnel.
– Leave the device exposed to atmos-
pheric agents.
– Place the device near to heat sourc-
es or expose it to direct sunlight.
– Position the device in proximity of
sources of electromagnetic distur-
bance.
– Open and/or replace the battery.
– Use solvents to clean the device.
– Incorrectly dispose of packaging
material and keep it out of children’s
reach as it may represent a hazard.
Disposal must be performed in line
with applicable laws.
– Dispose of the device as domestic
waste.
1.3 Device description
ElecTo SONIC is a static cold water meter.
It measures the flow volume, flow rate and
other parameter values using ultrasonic
technology. The meter continuously moni-
tors the status of operating and installation
parameters. In the event of a fault, it trig-
gers and sends the dedicated alarms.
ElecTo SONIC is equipped with an integrat-
ed radio which uses Wireless M-Bus and
LoRaWAN technology allowing remote data
transmission. Data can be received using a
special mobile reading kit or via concentra-
tors and a fixed network.
The main technical features of ElecTo SON-
IC are:
– Liquid crystal display;
– NFC interface for device configuration;
– Protection class IP68;
– Accuracy class up to R800;
–
Fault reporting. Reporting of abnormal
water consumption and error detection
(see Alarms);
– Absence of moving parts. Resistance to
wear and constant functioning over time;
–
Datalogging functionality. Historic val-
ues are available relating to: current vol-
ume, backflow volume, minimum and
maximum flow rate, water temperature;
– Power supply. Long-lasting lithium bat-
tery (depending on the set configuration);
– Available with built-in wM-Bus and/or
LoRaWAN 868MHz radio communica-
tion.