EN
22
3.3 Programming on initial
installation of the module
The
Arrow
EVO
Standalone module is supplied
with a series of set-up data already set to the
default values.
On first installation, after activating the module,
you can change the settings if necessary using:
– Evo Console PC (MS Windows) – download
from
www.maddalena.it
in the software
section
– Evo app (Android OS) – download from
Google Play Store
These two programs can be used to change
the radio’s default settings.
3.4
Troubleshooting
FAULT
CAUSE
SOLUTION
The radio module is not
transmitting
Electrical or electronic
devices interfere with the
signal
Move devices to a sufficient distance
away
Move the receiver closer
Battery empty
Replace the battery (contact the metering
operator)
The module is not active
Check the activation procedure has been
applied correctly
The module is transmitting
but the data fields are not
populated
The paired sensor is faulty Contact the metering operator
Faulty module
Contact the metering operator
l
WARNING!
For a complete list of alarms, please refer to the specific manual.
