Getting Connected
6
PRE-OUT
2.BALANCED AUDIO OUTPUT CONNECTIONS:
●
Connect one end of the XLR cables to the left and right BALANCED AUDIO OUTPUT jacks on the THUNDER.
●
.
Connect one end of the XLR cables to the left and right AUDIO/LINE/AUX INPUT jacks on the external device
4.
:
CONNECTING EFFECTS USING THE EFFECT INSERT
Connecting to an audio mixer or TV with RCA audio inputs
What you will need
●
Using 1 RCA L R red
white stereo RCA cable included
/
(
&
)
(
)
●
Using two XLR type audio cables not included
-
(
)
●
●
●
●
●
Using 1 audio mixer or TV with RCA audio inputs
1.AUDIO OUTPUT 1 & 2 CONNECTIONS:
●
Connect one end of the L R red
white RCA cable to the
/
(
&
)
red and white audio outputs labeled AUDIO OUTPUT 1 & 2
on the rear panel of the
.
●
Connect the other end of the L R red
white RCA cable to
/
(
&
)
the audio input on an audio mixer or TV.
Using two ¼-inch audio cables (not included).
Using three ¼-inch stereo audio cables (not included).
Using one audio amplifier with XLR audio inputs.
Using one audio amplifier with ¼-inch audio inputs.
THUNDER
1.
2.
3.By using the built-in EFFECT INSERT you can add external effects to vocals and/or guitar or keyboard or
microphone without compromising the quality of the original signal.
Connect one end of the ¼ inch stereo audio cables to the GUITAR EFFECT, KEYBOARD EFFECT, or
MIC EFFECT inserts on the rear panel of the THUNDER.
Connect the other end of the ¼ inch stereo audio cables to the sound effect device.
3.¼ INCH PRE-OUT CONNECTIONS:
Connect one end of the ¼ inch audio cables to the left and right PRE-OUT jacks on the THUNDER.
Connect one end of the ¼ inch audio cables to the left and right AUDIO/LINE/AUX INPUT jacks on
the external device.
●
●
WWW.MADBOY-AUDIO.COM