Connecting Power
To power the
What you will need
1 AC power cord (included)
Surge-protector (recommended) or a power outlet
NOTE: Before turning on the power make sure the red voltage selector [Fig. A] under
the AC INPUT is set to the proper voltage. It should be set to 115V for North America
and 230V for most European countries. Make sure you know the proper voltage for
your region before turning on the
.
1.Connect the AC end of the power cord into the AC INPUT on the rear panel of the
2.Connect the other end to a surge-protector or available power outlet
Connecting to a TV / Video Monitor with an RCA input
What you will need
●
1 RCA style video cable included
-
(
)
●
TV
video monitor with an RCA video input
/
1.Connect one end of the RCA video cable to the yellow Video Out on the rear panel of the
.
2.The
has two RCA-type VIDEO OUTPUT jacks for connecting to TVs or monitor devices.
Both VIDEO OUTPUTS can be connected simultaneously.
3.Connect the other end of the RCA video cable to the Video Input on a TV / video monitor
Since the
contains built-in power amplifiers, speakers, DVD/CDG/CD player, USB player, and SD
THUNDER
card player, the
can be used as a self-contained sound system. However, the
contains
THUNDER
THUNDER
various audio video outputs to allow the
to be connected to multiple TV sets, external sound
THUNDER
systems, and/or multiple sound effect devices. The following content demonstrates the procedures for
connecting the
to the AC outlet and other audio video devices.
THUNDER
THUNDER
THUNDER
THUNDER
THUNDER
THUNDER
TV
TV
230
VOLTAGE SELECTOR
[Fig. A]
Getting Connected
5
WWW.MADBOY-AUDIO.COM