MadBoy BOOST-102, Руководство пользователя

Страница: 6 / 40

WWW.MADBOY-AUDIO.COM
6
Basic Operation Instructions
1. Connect the audio source, passive speakers and power cable to Boost-102.
2. Turn on your audio source and Boost-102.
3. Select right input channel from Boost-102.
4. Adjust music and microphone volumes from Boost-102.
Connecting the Audio Source
You can connect the analog audio source to LINE IN using RCA cable if your audio source have RCA
output. In case your audio source have 1/8" headphone connector, you can use 1/8" TRS plug - RCA
cable.
The digital connection can be made using optical Toslink cable. Optical connection is less
susceptible to noise and less likely cause ground loop problems in your audio system.
The audio source must be set to output audio in PCM format.
Connecting the Audio System
You can connect audio to your home theather or soundbar From LINE OUT using analog RCA cable or
from OPTICAL OUT using optical Toslink cable.
Subwoofer can be connected from SUBWOOFER OUT using RCA cable. Frequency range is not
limited, so it can be also used to connect the monitor speaker.
SUBWOOFER
OUT
OPTICAL
IN
OPTICAL
OUT
LINE
L
R
IN OUT
R
DVD PLAYER SUBWOOFER SMART TV SOUNDBAR
L
L
R
Getting Connected
ACTIVE SPEAKERS PASSIVE SPEAKERS