Macurco AimSafety PM150-CO2, Инструкция пользователя

Страница: 8 / 22

PM150-CO2 Portable Gas Monitor
REV – 1.0 [34-2900-0211-5] 8 | P a g e
5 Mode
5.1 Measuring Mode
When activated, gas concentration is displayed in measuring mode
5.2 Display Mode
In the measuring mode, by pressing Function key, the following icons will appear in the following order.
Max value
→ STEL value → TWA value → 1 st alarm set point → 2 nd alarm set point → STEL alarm set point →
TWA alarm set point → Firmware version → Calibration concentration → Calibration interval remaining date →
Bump test interval remaining date.
•
To move to the next menu, press the Function key.
•
At the last step, press Function key or do not push any button for 10 seconds, the device will return to the
Measuring Mode.
Max Value Measured STEL value
Measured TWA value Low Alarm Value Setting
High Alarm Value Setting
STEL Alarm Value Setting
TWA Alarm Value Setting Firmware version
Calibration Concentration
Calibration interval remaining
date
Bump test interval remaining date