E - 14
CONNECTING THE OTHER EQUIPMENT
AUDIO
IN
AV IN
DVD
Notes:
• If the external equipment is a television and this audio system is close to it, you may experience some interference.
• Make sure to use correct Audio/Video cable, wrong plug connection may cause weak signal.
• If you have a stereo VCR, make sure you set it in stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
C. Connecting to another source
This unit can play Dolby Digital, but only in two channels.
Digital connection
Analogue connection
Listening to another audio equipment
1. Turn on the Unit.
2. Turn on your audio equipment and follow the instructions provided with it to select the AUDIO IN or DIGITAL IN
function.
Audio equipment with
digital audio input jack
Rear of unit
COAXIAL DIGITAL AUDIO CABLE
Amplifier of
stereo system, etc.
Right side of unit
(No need to connect
the Yellow video plug)
(Red)
(White)
AUDIO/VIDEO CABLE
(Red)
(White)
AV IN
DVD
VIDEO
IN
AUDIO
IN
Watching a DVD on your TV
1. Turn on the unit, slide the
AV IN / DVD
switch to select "DVD".
2. Turn on the TV and follow the instructions provided with it to play the
DVD.
Notes: Please use the correct Audio/Video cable.
D. Connecting a TV
• If your TV has Audio/Video inputs
To VIDEO
& AUDIO
IN /OUT
Jack
TV
(Yellow)
(Red)
(White)
AUDIO/VIDEO
CABLE
AUDIO/VIDEO CABLE
(included)
Right side of unit
(Yellow)
(Red)
(White)
