Manual
Instructions for use
SBRT Systems
7
15112021V22IFU123100
MacroMedics ®
press/release
G5
G2
G1
G11
G12
G13
II.
Lower the SBRT Secure Arch and hand-tighten it in the desired position by turning the knobs on
the sides of the arch. Do not apply too much force as this may cause damage.
III.
To adjust the height of the Respiratory Suppression Plate,
press the yellow knob at the side. Move the Respiratory
Suppression Plate vertically into a desired indexed position.
Release the knob to lock the Plate into position.
5.3
PLACING THE ABDOMINAL VACUUM CUSHION
I.
Slot the white pins of the cushion into the holes at the top of the SBRT Secure Arch and slide the
white sliding mechanism into the locked position. In the locked position, the arrows on the Arch
and on the sliding mechanism of the Arch will be in-line with each other.
II.
Make sure that the arrows on the black attachment components of the cushion are in-line
with the arrows on the arch (pointing in the cranial direction).
III.
Slide the two hooks of the Vacuum Cushion over the small white knobs of the Arch on the caudal
side of the Arch. Tighten the small knobs of the Arch to secure the Vacuum Cushion in place.
