MACROMEDIA COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION..., Инструкция по использованию

Страница: 56 / 70

56 Chapter 4: Configuring Your System
To configure Netscape or iPlanet for ColdFusion MX in Windows:
1
Start the Web Server Configuration Tool by selecting Start > Programs > Macromedia
ColdFusion MX > Web Server Configuration Tool from the Start menu.
2
Click Add.
3
In the Server drop-down list box, select the host name and the server or cluster name to
configure. For the ColdFusion MX server configuration, this is always default. Clustering
support is only available on the JRun J2EE configuration.
Note: The server or cluster does not have to reside on the web server computer.
4
In the Web Server Properties area, select Netscape Enterprise Server/iPlanet and specify the path
to the directory that contains the obj.conf file.
5
Select Configure web server for ColdFusion MX applications .
Caution: Omitting the previous step causes your web server to serve ColdFusion MX source code.
6
Click OK.
7
Copy the CFIDE and cfdocs directories from cf_root \wwwroot to your web server root
directory. In addition, copy your application’s CFM pages from cf_root \wwwroot to your web
server root directory.
To verify your Netscape or iPlanet configuration:
1
Verify that the following file was created:
cf_root \runtime\lib\wsconfig\ number \jrun_nsapi35.dll (server configuration) or
jrun_root /lib/wsconfig/ number /jrun_nsapi35.dll (JRun J2EE configuration).
2
Open the Netscape configuration file, obj.conf, in the web server directory (for example, in
C:\iPlanet\Servers\https-
yourserver \config\obj.conf).
3
Verify that the following line was added to the file:
NameTrans fn="jrunfilter"
4
Verify that #JRun prefixes the following
NameTrans
line in the file:
#JRun NameTrans fn="pfx2dir" from="/servlet"
dir="$docroot/servlet" name="ServletByExt"
5
Verify that the following object element is at the end of the file:
<Object name="jrun">
PathCheck fn="jrunfilter"
Service fn="jrunservice"
</Object>
Configuring Apache web server in Windows
This section describes how to configure the Apache web server for ColdFusion MX in Windows,
and how to verify your configuration. You configure Apache using the Web Server Configuration
Tool in either GUI or command-line mode. This discussion describes how to use GUI mode. To
use the command line, open the batch files located in
cf_root \bin\connectors. For more
information, see the Web Server Management chapter of Configuring and Administering
ColdFusion MX .
To configure Apache for ColdFusion MX in Windows:
1
Start the Web Server Configuration Tool by selecting Start > Programs > Macromedia
ColdFusion MX > Web Server Configuration Tool from the Start menu.
2
Click Add.