(2).Aspect Ratio can be set as 16:9, 4:3 Pan Scan, 4:3 Letter Box;
(3).Default Aspect Ratio 4:3 PS;
(4).Press OK key to save the setting, the system will hint with
.
2.3.2.3 Video Output
Video output mode can change the mode of video output, you can adjust TV mode
according to the actual situation of you
receiving equipment.
1. Move the cursor to Video Output option, press VOL+/- key
to move
circularly and choose options and the setting can be
effective.
2. Video Output mode can be set as CVBS, RGB;
3. Default: RGB;
4. Press OK key to save set, the system will hint with
“Update
succeeds”
.
2.3.2.4 Brightness
If the brightness is not proper during watching, you can adjust
the current
brightness to be a proper one.
1.Move the cursor to Brightness option, press VOL+ key to move
the cursor
into the Properties list on the right, as shown in Figure
2.23:
2.Press CH+/- key to move upward and downward the cursor to
choose, press
ENTER key to confirm; in this moment, move the
cursor onto the options on
the left, and then values will become the ones you want.
3.Brightness can be set as: 0%~100%;
4. Default: 80%;
5. Press OK key to save the setting, the system will hint with
“Update succeeds”
.
2.3.2.5 Contrast
You can set system constant via contrast option.
1.Move the cursor to contract option, press VOL+ key to move
the cursor into the
Properties list on the right.
2.Press CH+/- key to move upward and downward the cursor to choose, press OK
key to confirm, in this moment, move the
cursor
onto the options on the left,
and then values will become the ones you want.
3.Contrast can be set as: 0%~100%;
4.Default:80%;
Figure 2.23
16
