Macrom M-DVDG1CH, Инструкция по эксплуатации

Страница: 22 / 24

20
Audio out
This terminal is used to audio channels output(R-R,R-L,F-R,F-L).
Video output/ Coaxial Connector
This connectors of VIDEO1 and VIDEO2 are used in combination
with the video inputs of another product( AV head unit or TV monitor).
This connector of COAXIAL is used to connect coaxial type digital audio input.
Audio/Video inputs Connector(AUX)
This connectors of Audio and Video are used in combination
with the audio/video outputs of another product.
Remote Control Sensor Connector(supplied for Stand Alone only)
When using the STAND ALONE mode,
Connect this connector to the remote control sensor unit.
When using the head unit, the remote control sensor of the head unit
can be used.
When using the head unit, connect this connector to the head unit by cable.
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened .
+12V Battery Lead
Connect this lead to the po)(12V) post of the vehicle’s battery.
+12V ACC Lead
Connect this lead to an open terminal on the vehicle’s fuse box
or another unused power source which pr12V) only
when the ignition is turned on or in the accessory position.
Standby Out Lead
This lead is used in combination with the other product(like Amplifier) with a
remote control input lead.
Connections
Ignition key
Battery
+12V ACC
ProwerGround
+12V Barttery
Power Ground Lead
Standby Out Lead
+12V ACC Lead
+12V BATT Lead
Power Ground Lead
AV WIRE
IP BUS
POWER CABLE
POWER CABLE
IP BUS WIRE
AV WIRE