If the system
doesn’t recognize
the drive, turn on
the power before
connecting the USB
cable.
Installation on a Mac using USB 2.0
To connect the device via USB 2.0 High Speed to a single
computer, see following instructions:
•
Turn on your computer and start Mac OS.
•
Make sure the Ethernet cable is disconnected.
•
Connect the M9-NDAS and turn it on.
•
No driver installation required.
•
The external drive will mount and show up on your desktop.
For factory new drives and more info about formatting, see
chapter 5.
Unplug Procedure
For the safe removal of your drive and to assure that no data is
lost, always follow the correct unplug procedure. Otherwise, an
error message will appear.
•
Drag the external hard drive icon into the trash bin.
•
Turn off your device.
- 6 -
