DC-SATA User Guide
If the system
doesn’t recognise
the drive, turn on
the power first,
before connecting
the interface cable
or connect the
device before
booting your
Operating System.
Installation on a PC
If the drive has been pre-installed and setup already, you do
not need to prepare anything else and can use it straight away.
If you have installed the drive yourself and this is a brand new
HDD, you will have to create a partition first and format the
drive before it can be used.
•
Turn on your Computer and start Windows
•
Connect the Daisy Cutter and turn it on
•
Let Windows search and install the driver automatically
•
Open “My Computer” to see your external hard drive
For factory new drives and more info about formatting, see
following pages under “Partitioning & Formatting”.
Removal Procedure
For the safe removal of your drive and to assure that no data is
lost, always follow the correct unplug procedure. Otherwise, an
error message will appear.
•
Click on the taskbar icon for external hardware
•
Choose your external hard drive and confirm to remove it
Page 8 / Chapter 3 - System Set Up
