Macnaught Pty Ltd
PO Box 90 Arncliffe NSW 2205 Australia
Telephone (02) 9567 0401
Facsimile (02) 9597 7773
Email: [email protected]
Web: www.macnaught.com.au
SPECIFICATIONS
Maximum Air Pressure
Minimum Air Pressure
Typical Air Consumption
Compressor Size
Noise Level
Air Inlet
Pump Ratio
B2 Booster Gun (Manual boost only)
Hose Type/Threads
Swivel Type/Threads
Manufacture Date
Free flow output
1035 kPa / 150 psi / 10.3 bar
400kPa / 60 psi / 4 bar
0.3m
3
per minute (9 cfm)
0.08m
3
per minute (3 cfm)
85 Db @ 2 Meters
¼” (F) NPT (Swivel Type)
50:1 (Grease Pressure is 50 times the air pressure
Up to 69.000 kPa / 10,000 psi / 690 bar
4m x 6mm I.D. SAE 100 R2 / ¼’ (M) NPT
High Pressure ‘Z’ type ¼” (F) NPT / 1/8” (M) NPT
Week / Year located on the side of the cylinder base
563g/min @ 150psi applied air pressure (8000psi stall pressure)
8
Macnaught Pty Ltd (“Macnaught”) warrants that all Products manufactured by Macnaught and
purchased after 1
st
of July 1999 will be free from any defects caused by faulty materials or
workmanship for a period of (5) years from the date of purchase of the product, provided that
during the Warranty period:
1)
Macnaught receives notice setting out full details of any defect in any product and
details of the time and place of purchase.
2)
The Purchaser, at their own cost returns the product to the nearest authorized Macnaught
service center.
For componentry contained in the product, (such as o’rings, seals, springs and hoses ) which
are subject to wear, the warranty period will be (12) months from the date of purchase of the
product.
Macnaught shall, at its option repair or replace any product found defective by its inspection.
This warranty does not cover failure of parts or components which, in the judgment of Macnaught,
arises from misuse, abrasion corrosion, negligence, accident, substitution of non-Macnaught
parts, faulty installation or tampering.
If Macnaught inspection discloses no defect in material or workmanship, repair or replacement
and return will be made at customary charges.
Macnaught’s liability and the purchaser’s rights under this Warranty shall be limited to such
repair or replacement and in particular, shall not extend to any direct, special, indirect or
consequential damage or losses of any nature.
The foregoing warranty supersedes, voids and is in lieu of all or any other warranties.
“Note: This warranty does not form part of, nor does it constitute, a contract between Macnaught
and the end-user or purchaser. It is additional to any warranty given by the seller of the products.
This warranty does not exclude, limit, restrict or modify the non-excludable rights or remedies
conferred upon the end-user or purchaser, or the non-excludable duties or liabilities imposed
on the seller or Macnaught, by Part V, Divisions 2 and 2A of the Trade Practices act 1974
(Commonwealth) or other legislative provisions. Macnaught otherwise excludes, to the extent
permitted by law, any rights conferred on the end-user or duties or liabilities imposed upon it.”
WARRANTY POLICY
