3. Hold the side of the product, look at the position of the wall hole of the rear cover, and slide the
wall to the top of the slot, that is, the installation of the wall is completed, as depicted in the picture
below.
Note:
Prior to the drilling, make sure there is no cable or other pipelines on the wall to avoid damage.
Remember
that the screws on the wall shall be fixed and firm to ensure the safety installation of the
electric heater on the wall. Please note the
safe distance mentioned below.
During
installation, the heater must be maintained sufficiently safe distance from combustible
materials and gas and away from water.
During
wall-hanging installation, keep the installation height from the ground greater than 15 cm.
Hanging-type heater shall be no less than 50 cm away from the ceiling.