Maclaren mx3, Инструкция по эксплуатации, Страница: 8 / 9

General Information & Safety
WARNING:
• DO NOT LEAVE CHILDREN UNATTENDED
• CHILDREN SHOULD BE PROPERLY HARNESSED IN AT ALL TIMES
• FOLLOW ALL INSTRUCTIONS CAREFULLY INCORRECT USE WILL
CAUSE DAMAGE TO THE STROLLER
• THE HARNESS SHOULD BE CORRECTLY FITTED AND ADJUSTED.
THE HARNESS IS NOT A SUBSTITUTE FOR PROPER ADULT
SUPERVISION.
• DO NOT CARRY EXTRA CHILDREN OR BAGS IN THIS SEAT.
• DO NOT USE THIS SEAT WITH ANY OTHER MODEL OF PRAM OR
STROLLER.
• PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ALL MOVING PARTS IF YOU
ADJUST THE STROLLER, OTHERWISE THEY MAY BE INJURED.
• DO NOT LIFT THE MX3 STROLLER AND CHILDREN USING THE MX3
TODDLER SEAT
CAUTION
• This seat is not recommended for children under 6 months and is not
suitable for children over a height of 96cm and a weight of
15kg.
• The stroller may be unstable if it is over-loaded Do not use acces-
sories or replacement parts other than those approved by Maclaren.
• For a compact fold remove the toddler seat before folding the
stroller.
• This MX3 toddler seat is for use with the Maclaren MX3 stroller
only; it should NOT be used with any other product.
• Ensure that you read the Maclaren MX3 Instruction leaflet before
using the toddler seat.
• For extra safety ‘D’ rings are provided for attachment of a separate
harness to BS6684
• Never leave a child in this seat whilst ascending or descending
stairs or escalators or when travelling on other forms of transport.
• Not to be used near to an open fire or exposed flame
Cleaning
• Clean frame with a damp cloth and mild detergent and dry
thoroughly. Do not use abrasives.
• The seat and other fabric can be sponge cleaned. Allow the
seat to dry naturally and thoroughly before reuse.
• Do not fold or store the product whilst wet and never store in
a damp environment as this can cause mildew to form.
Maintenance
• Do not leave in direct sunlight for extended periods
• Always check that the mechanical fixings and plastic parts are
free from damage and are free to operate correctly
• Replace the seat and harness assembly if ripped or damaged
in any way
Maclaren reserve the right to make design changes to any of
their products as part of their continuous development
programme.
This product, when used with the MX3, is designed and
manufactured to comply with AS/NZS 2088:2000
2
EN