993068
–
Revision A
P a g e
|
6 of 12
Detachable Parts
Detachable parts that are included with the product consist of the Battery and the QRS (Quick Release System) Carry Bar. This is
an optional accessory that is not included with the standard product.
Below are the instructions for attaching and detaching the QRS Carry Bar and the Battery.
Attaching/detaching QRS (Quick Release System) Carry Bar
If you have chosen to have QRS carry bar please follow the following section to attach and detach the carry bar from hoist.
Attach the carry bar (type ‘BF applied par
t) into the QRS Hook, located at the end of the boom, in the following way:
Attach
1.
On the hook, move the locking mechanism into the hook by pressing down on the tab (Figure 8 and 9).
2.
With the carry bar positioned sideways along the length of the bar, move the pin at the top of the carry bar into the
hook (Figure 10).
3.
Alternatively, with the carry bar positioned sideways, the pin at the top of the carry bar can gently push the locking
mechanism out of the way as the pin is carefully moved into the hook.
4.
Once the pin is in the hook, rotate the carry bar 90° down so the carry bar is hanging below the hook on the pin in the
hook. Move the locking mechanism into place by pushing up on the tab, securing the carry bar on the hook and lifting
tape. (Figure 11 and 12)
Detach
1.
Press down on the locking mechanism as described in step 1 (Attach).
2.
Rotate the Carry Bar to a sideways position and remove from the hook.
Figure 8
Figure 9
Figure 11
Figure 12
Figure 10
