Mackworth M Series, Руководство пользователя

Страница: 16 / 36

M-Series Mobile Floor lift User Manual Page 16 of 36 Part No. 9995xx / Rev.Draft / Aug 2019
12. Maintenance & Servicing
This maintenance must be carried out by a competent person and is a US
regulation. The inspection must take place every 6 months. Please see page 17
to 18 for illustrations to help with Key Safety Checks.
a. Certification : An authorized/competent service company or person
will issue a test certificate.
b. Batteries: The batteries are located in the Battery Pack and should
not require maintenance other than the regular charging as detailed
in the charging instructions.
c. Emergency down : Check the emergency down functionality. (see
illustrated image below (fig.6)
d. Actuator : The actuator should require no maintenance other than
checking for correct operation, listening for unusual noise and
checking for any damage. (see illustrated image below (fig.6)
e. Casters : Check the rear brake on the caster. Check all caster fixing
points. Check that the caster runs free and rotates easily. Remove any
build-up of hair, fluff, dust etc. Lubricate if necessary with a very light
mineral based grease.
f. Leg pivot points / under carriage
: Operate the foot pedal and ensure
a smooth opening and closing of the legs. Check the steel leg linkages
are secure. Adjust the steel linkages if necessary to align the legs.
Check all the screws in the under-carriage are secure, if loose secure
with Loctite®. (see illustrated image below (fig.7)
g. Battery pack : Check the functionality of the emergency stop button.
Inspect all male and female sockets for correct fitting. Inspect the
hand control functionality.
h. Mast : Ensure the mast fully engages into the base housing. Check the
operation of the mast locking hand wheel. Check the actuator
mounting brackets for excessive wear.
i. Boom : Check the attachment of the boom to the mast, ensure all
fixing points are secure and free from wear. Check the boom can
rotate freely and there is no excess movement of the boom in both
directions.
Maintenance & servicing (continued…)
j. Spreader bar : Check the spreader bar rotates and swings freely.
Check the central pivot M10 bolt and nylon lock nut for excessive