Mackworth M Series, Руководство пользователя

Страница: 14 / 36

M-Series Mobile Floor lift User Manual Page 14 of 36 Part No. 9995xx / Rev.Draft / Aug 2019
10. How to charge the floor lift battery
There are a number of batteries located in the power pack / battery
housing. They are charged through a shaver type socket in the base of
the control unit. When charging is required the 3 pin mains lead is
plugged into a wall socket and the shaver type socket goes into the base
of the control box.
a. Fit the mains power lead shaver type socket in the base of the
control box.
b. Plug the charger mains plug into a suitable mains outlet and
switch the mains supply on. (The RED Emergency Stop button has
to be out for the battery pack to charge)
c. Charging the battery is automatic and will normally take eight to
twelve hours to fully charge. (You cannot overcharge the batteries
if left for long periods of time).
d. To return the floor lift to use, switch off the mains supply.
Remove the shaver type plug from the socket at the base of the
control box. The floor lift is now ready for use.
Please pay attention to the following points to avoid any problems
with discharging batteries:
•
Keep the batteries fully charged.
•
The batteries should never be allowed to run completely dead.
•
The power pack should never be stored for long periods of time
without a regular charge.
• Do not leave the power pack plugged into the charger with the
main power off.
•
Regularly check the battery charger indicator, this will be on
the control box or handset.