background image

 

 

LIMITED WARRANTY 

 

 

Any  product  manufactured  by  MacKissic,  Inc.  and  found,  in  the  judgment  of  MacKissic,  Inc.,  to  be  defective  in 

material or workmanship, will be repaired or replaced by an Authorized MacKissic Service Dealer without charge for parts 
and labor to the original owner of the MacKissic product. 

 

 

The MacKissic product including any defective part must be returned to an Authorized MacKissic Service Dealer 

within  the  warranty  period.    The  expense  of  delivering  the  product  to  the  dealer  for  warranty  work  and  the  expense  of 
returning it back to the owner after repair or replacement will be borne by the owner.  Ma

cKissic’s responsibility is limited 

to making  the  required  repairs  or  replacements  only.    No  claim  of  breach  of  warranty  shall  be  cause  for  cancellation  or 
rescission of the sales contract of any MacKissic product.  Proof of purchase will be required by the dealer to substantiate 
any warranty claim.  All warranty work must be performed by an Authorized MacKissic Service Dealer. 

 

 

This  warranty  is  limited  to  two  years  from  the  date  of  original  retail  purchase  for  any  MacKissic  product  that  is 

used for consumer purposes or one year for commercial and rental use. 

 

 

This  warranty  does  not  cover  any  product  that  has  been  subject  to  misuse,  abuse,  neglect,  negligence,  or 

accident, or that has been operated in any way contrary to or inconsistent with the operating  instructions as specified in 
the  owner’s  manual.    The  warranty  does  not  apply  to  any  damage  to  the  product  that  is  the  result  of  improper 
maintenance, or to any product or parts that have not been assembled or installed as specified in the owner’s manual. 
 

 

The  warranty  does  not  cover  any  product  that  has  been  altered  or  modified.    In  addition,  the  warranty  does  not 

extend  to  repairs  made  necessary  by  normal  wear,  or  by  the  use  of  parts  or  accessories  which,  in  the  judgment  of 
MacKissic,  Inc.,  are  either  incompatible  with  the  MacKissic  product  or  adversely  affect  its  operation,  performance  or 
durability.  This warranty does not cover engines, electric starters, batteries, and tires which are warranted separately by 
their manufacturer and for a different period of time. 

 

 

MacKissic, Inc. reserves the right to change the design of any product without assuming any obligation to modify 

any product previously manufactured. 

 

 

THE DURATION OF THE LIMITED WARRANTY IS TWO YEARS CONSUMER, ONE YEAR COMMERCIAL AND 

RENTAL  USE.    REPAIR  OR  REPLACEMENT  AS  PROCEEDED  UNDER  THIS  LIMITED  WARRANTY  IS  THE 
EXCLUSIVE REMEDY OF THE PURCHASER.  MacKISSIC, INC., SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR 
CONSEQUENTIAL  DAMAGES,  EXCEPT  THE  LIMITED  WARRANTY  DESCRIBED  ABOVE,  ALL  IMPLIED 
WARRANTIES  (MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE)  ARE  SPECIFICALLY 
DISCLAIMED. 

 

 

MacKISSIC,  INC.  ASSUMES  NO  RESPONSIBILITY  FOR  INCIDENTAL,  CONSEQUENTIAL  OR  OTHER 

DAMAGES  INCLUDING,  BUT  NOT  LIMITED  TO,  EXPENSE  FOR  GASOLINE,  OIL,  EXPENSE  OF  DELIVERING  THE 
PRODUCT TO AN AUTHORIZED MACKISSIC SERVICE DEALER AND EXPENSE OF RETURNING IT BACK TO THE 
OWNER,  MECHANIC’S  TRAVEL  TIME,  TELEPHONE  OR  TELEGRAM  CHARGES,  RENTAL  OF  A  LIKE  PRODUCT 
DURING THE TIME WARRANTY REPAIRS ARE BEING PERFORMED, TRAVEL, LOSS OR DAMAGE TO PERSONAL 
PROPERTY, LOSS OF REVENUE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME OR INCONVENIENCE. 

 

 

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. 

 

 
 

2/22/18

 

 

37 

Содержание SC300M






































Отзывы: