MACKISSIC SC300M, Руководство пользователя

Страница: 14 / 37

To Free a Jammed Rotor
Before performing any maintenance procedure or inspection, stop the Engine, wait
five (5) minutes to allow all moving parts to come to a complete stop and cool.
Disconnect the Spark Plug Wire, keeping it away from the Spark Plug.
1. Remove any material left in the Chipper and Shredder Hoppers with a wooden
stick.
2. Check the Discharge Opening for clogs. If it is clogged, clear it with a stick.
3. Also, with a stick, loosen and remove any material left in the
Shredding/Chipping Chamber.
4. Start the machine and allow any remaining material in the
Shredding/Chipping Chamber to discharge.
5. If the Shredding/Chipping Chamber does not clear and the Rotor is still
jammed, repeat the above process.
6. Be certain the Shredding/Chipping Chamber is clear before trying to process
more material into the Hopper, clogging could result in Belt or Clutch failure.
To Clean Out a Clogged Shredder
1. Remove the Baffle Plate by removing the Nut on the Baffle Rod and then
removing the Baffle Plate (
Figure 6 ).
2. Remove the Screen by removing the Nuts on the Screen Rods and then
removing the Screen (
Figure 7 ). Remove any debris from the Screen.
3. Remove any debris wrapped around the Hammers, Shaft or any other portion of the
Rotor Assembly (
Figure 8 ).
4. Reposition the Screen and reinstall the Top and Lower Screen Rods. Secure the Rods
with the Nuts.
5. Reposition the Baffle Plate and reinsert the Baffle Rod. Secure the Rod with the Nut.
6. Reconnect the Spark Plug wire, start the machine, and allow any remaining material in
the Shredding Chamber to discharge.
7. If the Shredding Chamber does not clear, repeat the above process.
Be certain the Shredding Chamber is clear before trying to process more material
into the Hopper, clogging could result in Belt or Clutch failure.
Rods
Figure 8
14
Nut
Nuts