4
PART # 712-0074
712-0074
PART # 091-0085
OPERATING INSTRUCTIONS
STARTING:
STOPPING:
Adjust drag bar for proper depth and tilling
Release both handle levers.
conditions.
Place shift arm in N (neutral) position.
Make certain that both handle levers have
Move throttle to slow or stop.
dropped into disengage position.
Turn engine switch to OFF.
Place shift arm in N (neutral) position.
Move throttle to RUN position.
REVERSE:
Move choke to CHOKE position.
Release both handle levers.
Move engine ON/OFF switch to ON position.
Check behind for any obstacles.
Stand to side of tiller and pull starter rope.
Reduce throttle speed.
As engine starts move choke lever to RUN.
Place shift arm in R (reverse) position.
Move throttle to desired speed.
Engage left hand lever to engage wheels.
TILLING:
TRANSPORT:
Make certain that both handle levers have
Release both handle levers.
dropped into disengage position.
Place shift arm in 3 (3
rd
gear).
Place shift arm in 1 (first gear).
Engage left hand lever to engage
wheels.
Move throttle to ¾ speed.
DO NOT TILL IN 3
RD
GEAR.
Engage left hand lever to engage wheels.
Engage right hand lever to engage tines.
Adjust downward pressure on dragbar as
required
.
For difficult tilling conditions and breaking fresh
sod, put the dragbar foot in the up position.
For normal tilling conditions, use the dragbar
Foot in the down position.
