Owner
’s Manual
15
Owner’s Manual
Thrash Loudspeakers Specifications
Appendix B: Technical Information
Line Input Power
Detachable line cord
100V – 120V~, 50 – 60 Hz, 75 W
220V – 240V~, 50 – 60 Hz, 75 W
AC Connector
3-pin IEC 250 VAC, 10 A male
Power Supply Type
Switchmode
Safety Features
Input Protection
Peak and RMS limiting, power supply
and amplifier thermal protection
Display LED
Rear panel power / overload
Physical Properties
Thrash212:
Height:
26.4 in / 669 mm
Width:
14.8 in / 375 mm
Depth:
12.3 in / 313 mm
Weight:
36.4 lb / 16.5 kg
Thrash215:
Height:
28.0 in / 711 mm
Width:
17.1 in / 434 mm
Depth:
14.3 in / 363 mm
Weight:
40.8 lb / 18.5 kg
Mounting Methods:
Floor mount, pole mount via the built-in socket on the bottom
of the cabinet [Be sure the pole is capable of supporting
the weight of the loudspeaker].
There are no rigging points and they are NOT suitable for rigging.
Do not suspend a Thrash loudspeaker by its handles.
See page 13 for more information.
Options
T100 Loudspeaker Tripod Stand
P/N 2052464
SPM200 Loudspeaker Pole Mount
P/N 2035170
Disclaimer
Since we are always striving to make our products better
by incorporating new and improved materials, components,
and manufacturing methods, we reserve the right to change
these specifications at any time without notice.
The “Running Man” figure is a registered trademark of LOUD
Audio, LLC.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby
acknowledged.
©2022 LOUD Audio, LLC. All Rights Reserved.
Acoustic Performance
Frequency Range (–10 dB)
52 Hz – 20 kHz [Thrash212]
38 Hz – 20 kHz [Thrash215]
Frequency Range (–3 dB)
65 Hz – 20 kHz [Thrash212]
55 Hz – 20 kHz [Thrash215]
Horizontal Coverage Angle
90º
Vertical Coverage Angle
60º
Maximum SPL Peak
125 dB [Thrash212]
126 dB [Thrash215]
Monitor Angle
45˚
Transducers
Low Frequency
12 in / 305 mm [Thrash212]
15 in / 381 mm [Thrash215]
with ferrite
High Frequency
1.0 in / 25 mm titanium
high frequency driver
Power Amplifiers
System Power Amplification
Rated Power
1300 watts peak
Low Frequency Power Amplifier
Rated Power
1000 watts peak
Rated THD
< 1%
Cooling
Convection
Design
Class
D
High Frequency Power Amplifier
Rated Power
300 watts peak
Rated THD
< 1%
Cooling
Convection
Design
Class
D
Input/Output
Input Type
2x Female XLR – 1/4" Balanced
TRS combo jack
Mic Impedance
20 k Balanced
Line Impedance
1 M
Ω
Unbalanced Hi-Z
Mix Out
Male XLR Balanced
Mix Out Impedance
600 Balanced
Electronic Crossover
Crossover Type
24 dB/octave
Crossover Frequency
2.4 kHz