Mackie SRM210 V-Class Скачать руководство пользователя страница 21

Страница: 21 / 35

Owner

’s Manual

Owner’s Manual

What may be selected here, though, is Factory Reset.

As you might imagine, it restores all parameters back

to their default. This is a permanent reset with no undo,

so a confirmation dialog helps prevent accidents.

As we’ve discussed so many times before,

illuminating and selecting the left-facing arrow

returns you to the previous screen.

You should never ever ever EVER have to do

this, but there is one more way to do a factory

reset. We strongly recommend never doing

this unless the loudspeaker is powered on and the LCD

screen is nothing but black. If it comes to this, then

turn the unit off. Push and hold the speaker control

knob while turning the loudspeaker on. Release your

finger from the knob after three seconds and let the

loudspeaker “do its thing” for the next 30-60 seconds.

Now turn the loudspeaker off and on again. It works!

ABOUT / RESET

30.4 C / 86.8 F

0.0.4.415

FW :

0.0.115

DSP :

TEMP :

FACTORY RESET...

RESET

Confirm

factory reset?

YES

Movie Night

We don’t want to toot our own horn – but if we were,

we would use an SRM | V-Class loudspeaker! – but

we’re not beyond patting ourselves on the back.

Did you know that the LCD screen on the rear panel

of the loudspeaker doubles as a movie screen?!
Beyond the Configuration setting is a seventh feature

that may be selected: Movie Night! After pushing

the speaker control knob in to select Movie Night,

you will be presented with a wide selection of movies

in a multitude of genres is available, including:

Once a genre is selected, a mountain of movie titles

will be at your disposal, far too many to list here. Make

a choice, grab a bucket of popcorn and enjoy the show!

Make sure the LCD screen brightness

is set to high!

Fantasy

and

Sci-Fi

Mystery

and

Crime

Comedy

Action

and

Adventure

Romance

Western

Drama

Animated

Horror

Содержание SRM210 V-Class




































Результаты поиска

Содержание SRM210 V-Class

Отзывы:

Бренды по названию

Популярные бренды

Mackie SRM210 V-Class, Руководство пользователя

Результаты поиска

Содержание SRM210 V-Class

Отзывы:

Бренды по названию

Популярные бренды