5
HOOKUP DIAGRAM
Balanced XLR Connectors
There is also a male XLR connector labeled LOOP
OUT. This is also wired according to the above AES
standard.
The LOOP OUT connector allows you to connect
more than one SR150z to your system. Simply plug the
signal source (i.e., mixer output) into the first MAIN
INPUT jack, and patch that speaker’s LOOP OUT jack
to the next MAIN INPUT jack, and so on, daisy-chaining
multiple speakers.
CONNECTIONS
DAISY-CHAINING MULTIPLE SR1530z'
s
The SR150z has one female XLR input that accepts
a balanced line-level signal. When connecting a balanced
signal, be sure it’s wired per AES (Audio Engineering
Society) standards:
XLR
Hot (+) Pin
Cold (–)
Pin
Shield (Ground) Pin 1
The LOOP OUT jack is wired straight from the MAIN
INPUT connector — there is no electronic circuitry
between — so the signal coming out of the LOOP OUT
jack is exactly the same as the signal going in.
PLACEMENT
The SR150z speaker is designed to sit on the floor or
stage.
WARNING:
The cabinet has no rig-
ging points and is not suitable for rig-
ging.
NEVER
attempt to suspend the
SR150z by its handles.
The SR1530z
should never be pole-mounted.
You can create a horizontal array by placing the cabi-
nets side-by-side. However, you should have a good un-
derstanding of the relationship between the splay angle
(the angle between the facing sides of the cabinets),
the on-axis power, and frequency cancellation effects
between cabinets.
When two cabinets are placed side-by-side, the actual
splay angle is 0º (determined by a 10º angle on each
cabinet side). As the splay angle increases toward the
angle of horizontal coverage (90º for the SR150z), the
on-axis power decreases, but the frequency response
becomes smoother as the comb-filtering effects (caused
by the interaction in the area of double-coverage)
decrease.
As with any powered components,
protect them from moisture. If you
are setting them up outdoors, make
sure they are under cover if you
expect rain.
115V - AC
FUSE AC115V-T8A
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA •
MANUFACTURED IN CHINA FABRIQUE EN CHINE •
COPYRIGHT ©2004 • THE FOLLOWING ARE
TRADEMARKS OR REGISTERED TRADEMARKS
OF MACKIE DESIGNS INC.: "MACKIE", AND THE
"RUNNING MAN" FIGURE • PATENT PENDING
ACTIVE SOUND
REINFORCEMENT
SPEAKER SYSTEM
LOOP OUT
MAIN INPUT
PA
RA
LL
EL
ON
ON
PROTECTION
SR1530
Z
LI
N
E
LE
VE
L
SI
G
N
A
L
SERIAL NUMBER
MANUFACTURING DATE
UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DEBRANCHER AVANT DE REMPLACER LE FUSIBLE
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REPLACE WITH THE SAME TYPE FUSE AND RATING.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
CAUTION
115V - AC
FUSE AC115V-T8A
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA •
MANUFACTURED IN CHINA FABRIQUE EN CHINE •
COPYRIGHT ©2004 • THE FOLLOWING ARE
TRADEMARKS OR REGISTERED TRADEMARKS
OF MACKIE DESIGNS INC.: "MACKIE", AND THE
"RUNNING MAN" FIGURE • PATENT PENDING
ACTIVE SOUND
REINFORCEMENT
SPEAKER SYSTEM
LOOP OUT
MAIN INPUT
PA
RA
LL
EL
ON
ON
PROTECTION
SR1530
Z
LI
N
E
LE
VE
L
SI
G
N
A
L
SERIAL NUMBER
MANUFACTURING DATE
UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DEBRANCHER AVANT DE REMPLACER LE FUSIBLE
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REPLACE WITH THE SAME TYPE FUSE AND RATING.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
CAUTION
115V - AC
FUSE AC115V-T8A
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA •
MANUFACTURED IN CHINA FABRIQUE EN CHINE •
COPYRIGHT ©2004 • THE FOLLOWING ARE
TRADEMARKS OR REGISTERED TRADEMARKS
OF MACKIE DESIGNS INC.: "MACKIE", AND THE
"RUNNING MAN" FIGURE • PATENT PENDING
ACTIVE SOUND
REINFORCEMENT
SPEAKER SYSTEM
LOOP OUT
MAIN INPUT
PA
RA
LL
EL
ON
ON
PROTECTION
SR1530
Z
LI
N
E
LE
VE
L
SI
G
N
A
L
SERIAL NUMBER
MANUFACTURING DATE
UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DEBRANCHER AVANT DE REMPLACER LE FUSIBLE
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REPLACE WITH THE SAME TYPE FUSE AND RATING.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
CAUTION
115V - AC
FUSE AC115V-T8A
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA •
MANUFACTURED IN CHINA FABRIQUE EN CHINE •
COPYRIGHT ©2004 • THE FOLLOWING ARE
TRADEMARKS OR REGISTERED TRADEMARKS
OF MACKIE DESIGNS INC.: "MACKIE", AND THE
"RUNNING MAN" FIGURE • PATENT PENDING
ACTIVE SOUND
REINFORCEMENT
SPEAKER SYSTEM
LOOP OUT
MAIN INPUT
PA
RA
LL
EL
ON
ON
PROTECTION
SR1530
Z
LI
N
E
LE
VE
L
SI
G
N
A
L
SERIAL NUMBER
MANUFACTURING DATE
UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DEBRANCHER AVANT DE REMPLACER LE FUSIBLE
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REPLACE WITH THE SAME TYPE FUSE AND RATING.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
CAUTION
Mixer or
Preamplifier
Right
Line level
Output
Left
Line level
Output
To Next
Speaker
To Next
Speaker
1202-VLZ
PRO