AUTO TAKE:
Used for multiple record passes. When
Auto Increment mode is selected, virtual track numbers
are automatically incremented after each record pass.
In Auto Edit mode, multiple recordings take place on
the same virtual track, but previously recorded audio for
the take is shifted down to the next virtual track.
T-CODE CHASE:
Allows the SDR24/96 to sync to
external time code.
LOCATE:
Jump to Locate 1, 2, 3, or 4.
STORE:
Store Locate points 1-4.
LOOP:
Enables looped playback or recording.
PUNCH:
Enables Auto Punch mode.
REHEARSE:
Use to practice punching-in and
punching-out. Punch-in and punch-out points are
automatically saved to Locates 3 and 4, respectively.
ALL INPUT:
Both armed and unarmed tracks
monitor their inputs in Play and Record. Use for
rehearsing and level-setting.
AUTO INPUT:
Both armed and unarmed tracks
monitor their previously recorded audio in Play, and
armed tracks monitor their inputs in Record (unarmed
tracks still monitor their previously recorded audio).
Use for recording.
Status Display:
Error, Sample Rate, Word Length,
VariSpeed, and Time Code Sync indicators.
Current Time Display:
Shows the current locator
time in Hours:Minutes:Seconds:Frames.
EXT CLOCK:
Indicates when the SDR24/96 syncs to
an external clock.
LCD Display:
Backlit 2x24-segment display provides
selection options for the four SELECT buttons.
Page Left and Page Right Buttons:
Used to scroll
through the menus in the display.
SELECT Buttons:
Used to select options in the
display.
Transport Controls:
Includes Rewind, Fast Forward,
Stop, Play and Record.
OUT
IN
IN
IN
OUT
OUT
DIGITAL
WORD CLOCK I/O
MIDI
ADAT SYNC
IN
ADAT SYNC
OUT
SERIAL
9-PIN
FOOT
SWITCH
SMPTE
MICRO/
REMOTE 24
CNTRL
ANALOG OUT 1 - 8
ANALOG OUT 9 - 16
ANALOG OUT 17 - 24
ANALOG IN 1 - 8
ANALOG IN 9 - 16
ANALOG IN 17 - 24
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REPLACE WITH THE SAME TYPE FUSE AND RATING.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DEBRANCHER AVANT DE REMPLACER LE FUSIBLE
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION
SERIAL NUMBER
MANUFACTURING DATE
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC • WOODINVILLE • WA 98072 • USA
MADE IN USA • FABRIQUE AU USA • PATENTS PENDING COPYRIGHT ©1998 THE FOLLOWING ARE TRADEMARKS OR
REGISTERED TRADEMARKS OF MACKIE DESIGNS INC.: "MACKIE.", MACKIE DIGITAL SYSTEMS AND THE "RUNNING MAN" FIGURE.
POWER
USB
1 - 8
IN
OUT
DIGITAL
9 - 16
IN
OUT
DIGITAL
17 - 24
X2
1-4
X2
5-8
X2
9-12
IN
OUT
24 TRACK/24 BIT DIGITAL
AUDIO RECORDER
HIGH RESOLUTION
NON-LINEAR RECORDER
96
SDR
100 - 240V 250mA
50/60Hz
Rear Panel Features
Fan:
Keeps the SDR24/96 running cool.
IEC Socket:
Connect the detachable linecord here.
The SDR24/96 has a universal switching power supply
and accepts an AC line voltage between 100 and 240
VAC. No voltage select switch to worry about!
USB:
Use to connect to a USB (Universal Serial Bus)
port on a PC or Macintosh computer to backup and
transfer files. The SDR24/96 must be in USB Mass
Storage Mode (
SETUP:Page Right:System:USBMS
) to
use the USB port.
ANALOG INputs and OUTputs:
DB25 Female
connectors send and receive balanced analog line-level
signals. See “Appendix D” in the Operation Manual for the
pinout diagram, and “Appendix E” for compatible cables.
DIGITAL INputs and OUTputs:
ADAT™ optical
format send and receive digital audio signals.
WORD CLOCK IN and OUT:
BNC connectors send
and receive word clock signals.
SMPTE IN and OUT:
1/4" TRS connectors send and
receive SMPTE LTC (Longitudinal Time Code). LTC
Output can be manually turned on and off
(
SETUP:Sync:Page Right:LtcO
).
MIDI IN and OUT:
5-Pin DIN connectors send and
receive MTC (MIDI Time Code) and MMC (MIDI
Machine Control). MTC Output can be manually turned
on and off (
SETUP:Sync:Page Right:MtcO
).
FOOTSWITCH:
1/4" TS jack for footswitch control
of Play/Stop or Punch In/Punch Out.
REMOTE:
RJ-45 connector for the optional Micro
Remote or Remote 24.
ADAT SYNC IN and OUT:
DB9 Female connectors
for connecting to the Sync connections on an ADAT
multitrack recorder.
SERIAL 9-PIN:
DB9 Female connector for
connecting transport controllers that use the EIA
RS-422 serial data communication standard (supports
Sony
®
9-Pin protocol).
Part No. 820-260-00 Rev. A1 03/02
© 2002 Mackie Designs Inc. All rights reserved.
Printed in the U.S.A.
P R O J E C T : F e e l t h e L o v e
A V A I L : 0 2 : 2 7 : 2 6 o n E X T
44.1k
VARI
48k
24 BIT
16 BIT
TC
ERROR
MINUTES
HOURS
SECONDS
FRAMES
EXT
CLOCK
SELECT
SELECT
SELECT
SELECT
POWER
24 TRACK/24 BIT DIGITAL AUDIO RECORDER
ALL
INPUT
AUTO
INPUT
PUNCH
REHRSE
LOOP
LOCATE
STORE
DELETE
LAST
SETUP
EDIT
T-CODE
CHASE
AUTO
TAKE
TRACK
PROJECT
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
HIGH RESOLUTION
NON-LINEAR RECORDER
X2
96
SDR
REWIND
FAST FWD
PLAY
STOP
RECORD
