background image

5

Owner’s Manual

Owner’

s Manual

Quick Start

We realize that you can’t wait to hook up your new 

Mackie MR5mk2 Studio Monitors and try them out.  
Nevertheless, please take the time to read this page 
NOW, and the rest can wait until you’re good and ready.

1.  Turn the INPUT LEVEL [2] control on the back of the 

cabinet down (fully counterclockwise) before turning 
on the monitor for the first time.

2.  Set the power switch [5] on the back panel off. This will 

prevent you from accidentally connecting a hot signal 
source to the monitor and getting a rude surprise.

3.  Leave the High Freq [3] and Low Freq [4] Filter 

switches at their Normal positions. 

4.  Connect the line-level monitor signal from your mixer, 

preamp, or other signal source to the INPUT [1] jack on 
the MR5mk2 Studio Monitor (1⁄4-inch PHONE, XLR, or 
RCA).

5.  Connect the supplied AC power cord to the IEC socket 

[6] on the back of the monitor. Plug the other end into 
an AC outlet properly configured with the voltage    
corresponding to the markings next to the IEC socket.

6.  Start your signal source (tape deck, CD, DAW, or 

whatever), but leave the master volume control on your 
mixer or preamp down. 

7.  Turn on the power switch [5] on the MR5mk2. The 

power LED [8] on the front panel will illuminate.

8.  Slowly turn up the INPUT LEVEL [2] control on the 

back of the monitor to its fully clockwise position 
(MAX). 

9.  Adjust the master volume on your mixer or preamp to 

a comfortably loud listening level. If the MR5mk2 gets 
loud really fast, turn down the INPUT LEVEL control to 
its center position (12 o’clock) to provide more volume 
control on your mixer or preamp.

Enjoy the silky smooth highs and authoritative,    

commanding lows of the MR5mk2. Then read the rest of 
this manual.

An Extremely Important Note on 

MR5mk2 Bass Response and Your 

Control Room.

Your new MR5mk2s achieve their best bass 
 response in a room that’s optimized for bass 
 reproduction. A lot of factors can conspire to 

thwart the MR5mk2s’ extended low frequency – including 
room shape, room volume and  acoustical treatment. 

This is not a cop-out or an apology. It’s plain old 

physics in action. Luckily we’ve armed you with some 
compensating controls that you can use to optimize the 
frequency response of the speakers in your particular 
room. Consider the following:

Low-Frequency Response

When you put your MR5mk2s in a corner or up against 

walls, their bass characteristics change. The apparent 
loudness of the low frequencies increases when the 
monitors are placed close to a wall, and even more so 
when they are placed in a corner.

If you have placed the monitors away from the walls 

and corners and you would like to hear a little more 
bass, try setting the LOW FREQ FILTER [4] switch to 
the +2 dB position to provide a gentle boost to the low 
frequencies (below 100 Hz). If it’s still not enough bass, 
try the +4 dB position to provide a little more bass boost.

High-Frequency Response

The MR5mk2s are designed to provide a smooth 

frequency response throughout the mid and high range. 
Nevertheless, you may decide that you need a little more 
or a little less high frequencies in your monitors while 
you are mixing. The HIGH FREQ FILTER [3] switch 
provides a gentle boost or cut in the frequencies above 
5 kHz. Remember that boosting the high frequencies in 
the monitors can result in a duller mix, while reducing 
the high frequencies can result in a brighter overall mix.

Additional Tidbits of Wisdom

•  Never listen to loud music for prolonged periods. Please 

see the Safety Instructions on page 2 for information on 
hearing protection.

•  

When you shut down your equipment, turn off the 
MR5mk2 studio monitors first to prevent thumps and 
other noises generated by any upstream equipment from 
coming out the speakers. When powering up, turn on the 
monitors last.

•   Save the shipping box! You may need it someday.
•  Save your sales receipt in a safe place. It’s your    

warranty!

Содержание mr5mk2

















Отзывы: