background image

11

Owner’s Manual

Owner’

s Manual

XLR Connectors

XLR connectors are used to make balanced  

connections to the MR5mk2. They are wired as follows, 
according to standards specified by the AES (Audio 
Engineering Society).

XLR

  

Hot (+) Pin 2  
Cold (–)Pin 3  
Shield (Ground) Pin 1 

1/4" TRS Phone Plugs and 

Jacks

“TRS” stands for Tip-Ring-Sleeve, the three  

connections available on a stereo 1/4" or balanced 
phone jack or plug. TRS jacks and plugs are used to 
make balanced connections to the MR5mk2.

1/4" TRS Balanced Wiring:

 

Hot (+) Tip

 

Cold (–) Ring

 

Shield (Ground) Sleeve

2

2

3

1

1

SHIELD

COLD

HOT

SHIELD

COLD

HOT

3

SHIELD

COLD

HOT

3

2

1

SLEEVE

TIP

SLEEVE

TIP

RING

RING

TIP

SLEEVE

RING

1/4" TS Phone Plugs and Jacks

“TS” stands for Tip-Sleeve, the two connections  

available on a mono 1/4" phone jack or plug. They are 
used for unbalanced signals. It is okay to connect an 
unbalanced 1/4" phone plug into the 1/4" TRS phone 
jack on the MR5mk2.

1/4" TS Unbalanced Wiring:

 

Hot (+) Tip

 

Shield (Ground) Sleeve

RCA Plugs and Jacks

RCA-type plugs (also known as phono plugs) and 

jacks are often used in home stereo and video  
equipment and in many other applications. They are  
unbalanced and electrically equivalent to a 1/4" TS 
phone plug.

RCA Unbalanced Wiring:

 

Hot (+) Tip

 

Shield (Ground) Sleeve

SLEEVE

TIP

TIP

SLEEVE

TIP

SLEEVE

TIP

SLEEVE

TIP

SLEEVE

Appendix B: Connectors

Balanced XLR Connectors

Balanced 1/4" Connectors

Unbalanced 1/4" Connectors

RCA Unbalanced Connectors

Содержание mr5mk2

















Отзывы: