Mackie HUI, Справочное руководство

Страница: 12 / 36

12
H
U
I R E F E R E N C E G U I D E
Switch Matrix Section
NOTE: The functions of some of these switches
depend on your particular DAW software. There-
fore, you may want to consult your DAW manual
for further details.
This section contains switches for global au-
tomation enabling, mode selection, group
creation, and more.
1
Function (“F”) keys. These keys pro-
vide a number of special functions relating to
the operation of the HUI. Refer to the table on
page 31 in the “Specifications” section for de-
tails.
2
Auto Enable switches. These switches
globally enable automation for FADER , MUTE ,
PAN
,
SEND
,
PLUG IN
, and
SEND MUTE
.
3
Auto Mode switches. These switches
arm (or disable) automation on individual chan-
nels or channel groups. Options are
READ ,
TOUCH , LATCH , WRITE , TRIM , and OFF .
4 Status/Group switches. These switches
are used to query automation, monitor, and
group status, and to create and change groups.
They include
AUTO
,
GROUP
,
MONITOR
,
CRE-
ATE , PHASE , and SUSPEND .
5
Edit switches. These switches perform
standard editing functions, including CAP-
TURE , SEPARATE , CUT , COPY , PASTE , and
DELETE
.
6
Time Code Display and mode LEDs.
Shows current time location in either time
code, feet, or beats. LEDs indicate which mode
is being displayed. If no LED is lit, the display
is in standard minutes/seconds mode.
Note: Once communication is established be-
tween HUI and the DAW software, the decimal
point in the lower right corner of the Time Code
Display blinks (once per second). If incoming
MIDI communication is disrupted for any reason,
the Time Code Display will read “Off Line.”
7
Rude Solo Light. A gentle reminder that
a channel (or channels) in your mix session is
soloed, whether it’s part of the current bank of
eight channels or not.
8
Locate/Numerics keypad. Equivalent to
its computer keyboard counterpart.
Control Room Section
The features found in this parcel of real es-
tate (pictured on the next page) were included to
let you use HUI without having to dedicate a
mixer to monitoring functions. You can control
input and output sources, as well as master
volume, from this section. With the talkback
features you can slate takes or talk to the voice
talent, either with the in-panel talkback mic or
with an external mic plugged into HUI’s back-
side. We’re sure you’ll find these features quite
useful in your daily DAW work. (See page 18
for more info.)
AUTO
PLUG IN SEND MUTE TRIM OFF PHASE SUSPEND
PAN SEND LATCH WRITE MONITOR CREATE
PASTE
CUT
FADER MUTE READ TOUCH GROUP CAPTURE
DELETE
COPY
SEPARATE
AUTO ENABLE AUTO MODE EDIT STATUS/GROUP
TIME CODE
FEET
RUDE
SOLO
LIGHT
BEATS
LOCATE/NUMERICS
F6 F7 F1 F2 F3 F4 F5 F8/ESC
-
+
CLR
*
=
/
7 8 9
4 5 6
1 2 3
0
E
N
T
E
R
.
HUI FEATURES AND CONTROLS