10
Frequencies below the crossover frequency
are sent to the subwoofer, and frequencies
above the crossover frequency are sent to the
LEFT
and
RIGHT
OUT
puts, which are con-
nected to the main/satellite speakers.
Set the crossover frequency to the lowest
frequency response rating of the main/satellite
speakers.
MASTER OUT/SLAVE IN
Balanced XLR and unbalanced RCA female
connectors are provided for the
MASTER OUT/
SLAVE IN
puts. Use these for daisy-chaining two
HRS10s by connecting the
MASTER OUT
jack
from the first subwoofer to the
SLAVE IN
jack
on the second subwoofer (see note below).
The
SLAVE IN
bypasses all filtering, but is
affected by the
POLARITY
and
INPUT SENSI-
TIVITY
settings.
The
MASTER OUT
is post-filtering (vari-
able and elliptical crossover, subsonic filter,
and LFE gain) and pre-
POLARITY
and
INPUT
SENSITIVITY
.
Note:
You cannot daisy-chain more than one
additional subwoofer using these connections.
If
SLAVE IN
is used as an input, the
MASTER
OUT
has no signal present. To connect more
subwoofers, connect the
MASTER OUT
from
the first subwoofer to the
LEFT (MONO)
IN-
put of the second subwoofer with the
FILTER
BYPASS
switch pushed in. Then connect the
MASTER OUT
of the second subwoofer to the
LEFT (MONO)
IN
put of the third subwoofer,
and so on.
SUBWOOFER BYPASS FOOT SWITCH
This is a 1/4” jack for connecting a normally-
open footswitch. When the switch is closed, the
subwoofer is muted and the
LEFT
and
RIGHT
OUT
puts pass the full-range signal to the main/
satellite speakers.
This is useful for making a quick com-
parison between the HRS10 enhanced and
non-enhanced low-frequency playback.
REMOTE INDICATOR
This is a 1/4” jack for connecting a remote
indicator to indicate when the subwoofer is
bypassed. An internal relay closes, shorting
the tip and sleeve of the
REMOTE INDICA-
TOR
jack whenever the subwoofer is in bypass
mode, either triggered manually with the
FOOT SWITCH
or by the auto-off function.
This can be used to turn on a remote, low-
voltage lamp. Note that this jack does not
provide power. It accepts a maximum of 4 VDC
120 VAC, 60 Hz,
575 WATTS
POWER
ON
POLARITY
(N/A)
LFE GAIN
SUBSONIC FILTER
SUBSONIC FILTER
CROSSOVER CONTROLS
FILTER SELECT
FILTER BYPASS
STANDARD SETTINGS
NORMAL
80Hz
SUB
SAT
INPUT SENSITIVITY
THX PM3 SETTINGS
POLARITY
LFE GAIN
CROSSOVER CONTROLS
FILTER SELECT
FILTER BYPASS
NORMAL
80Hz
SUB
SAT
INPUT SENSITIVITY
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION
CAUTION
HEATSINK SURFACE HOT
AVOID CONTACT
CAUTION
AVIS:
RISCQUE DE CHOC ÉLECTRIQUE — NE PAS OUVRIR
SERIAL NUMBER
MANUFACTURING DATE
( 5.1)
LFE GAIN
"MACKIE", "FR SERIES", AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKSOF MACKIE DESIGNS, INC.
"THX PM3" AND "LUCASFILM" ARE TRADEMARKS OF
LUCASFILM, LTD. USED BY PERMISSION
S
M
SLAVE/MASTER
SLAVE
IN
INPUT/OUTPUT
INPUT/OUTPUT
MASTER
OUT
LEFT
IN
OUT
RIGHT
IN
OUT
FOOT SWITCH
*MAX OPEN CIRCUIT 24V
*MAX CLOSED CIRCUIT 1A
OPEN - SUB ON, L/R BASS MANAGED
CLOSED - SUB DEFEAT, L/R FULL RANGE
REMOTE INDICATOR
SUBSONIC FILTER
FLAT
15Hz
OFF
NORMAL
POLARITY
INPUT SENSITIVITY
0
ϒ
180
ϒ
FILTER SELECT
LFE GAIN
CROSSOVER
VARIABLE
110Hz ELLIPTICAL
VARIABLE
110Hz ELLIPTICAL
0dB
+
10dB
FILTER BYPASS
FILTER IN
FULL RANGE
SUB
110Hz
55Hz
80Hz
SAT
CROSSOVER
SUB
110Hz
55Hz
80Hz
SAT
(MONO)
POWER
POWER
SUB BYPASSED
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA
©2001 MACKIE DESIGNS INC. ALL RIGHTS RESERVED
PATENTS PENDING
INTERNAL AMPLIFICATION
500W
™
OUT
IN
L
R
L
R
*TO INSURE PRODUCT SAFETY, POWER SUPPLIES MEETING CLASS-2 INSULATION
REQUIREMENTS SHOULD ONLY BE USED WITH THIS CONNECTOR
SUBWOOFER BYPASS
REMOTE INDICATOR CIRCUIT CLOSED WHEN SUB BYPASSED
POLARITY &
INPUT SENSITIVITY ACTIVE
PROCESSED SIGNAL
120 VAC, 60 Hz,
575 WATTS
POWER
ON
POLARITY
(N/A)
LFE GAIN
SUBSONIC FILTER
SUBSONIC FILTER
CROSSOVER CONTROLS
FILTER SELECT
FILTER BYPASS
STANDARD SETTINGS
NORMAL
80Hz
SUB
SAT
INPUT SENSITIVITY
THX PM3 SETTINGS
POLARITY
LFE GAIN
CROSSOVER CONTROLS
FILTER SELECT
FILTER BYPASS
NORMAL
80Hz
SUB
SAT
INPUT SENSITIVITY
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION
CAUTION
HEATSINK SURFACE HOT
AVOID CONTACT
CAUTION
AVIS:
RISCQUE DE CHOC ÉLECTRIQUE — NE PAS OUVRIR
SERIAL NUMBER
MANUFACTURING DATE
( 5.1)
LFE GAIN
"MACKIE", "FR SERIES", AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKSOF MACKIE DESIGNS, INC.
"THX PM3" AND "LUCASFILM" ARE TRADEMARKS OF
LUCASFILM, LTD. USED BY PERMISSION
S
M
SLAVE/MASTER
SLAVE
IN
INPUT/OUTPUT
INPUT/OUTPUT
MASTER
OUT
LEFT
IN
OUT
RIGHT
IN
OUT
FOOT SWITCH
*MAX OPEN CIRCUIT 24V
*MAX CLOSED CIRCUIT 1A
OPEN - SUB ON, L/R BASS MANAGED
CLOSED - SUB DEFEAT, L/R FULL RANGE
REMOTE INDICATOR
SUBSONIC FILTER
FLAT
15Hz
OFF
NORMAL
POLARITY
INPUT SENSITIVITY
0
ϒ
180
ϒ
FILTER SELECT
LFE GAIN
CROSSOVER
VARIABLE
110Hz ELLIPTICAL
VARIABLE
110Hz ELLIPTICAL
0dB
+
10dB
FILTER BYPASS
FILTER IN
FULL RANGE
SUB
110Hz
55Hz
80Hz
SAT
CROSSOVER
SUB
110Hz
55Hz
80Hz
SAT
(MONO)
POWER
POWER
SUB BYPASSED
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA
©2001 MACKIE DESIGNS INC. ALL RIGHTS RESERVED
PATENTS PENDING
INTERNAL AMPLIFICATION
500W
™
OUT
IN
L
R
L
R
*TO INSURE PRODUCT SAFETY, POWER SUPPLIES MEETING CLASS-2 INSULATION
REQUIREMENTS SHOULD ONLY BE USED WITH THIS CONNECTOR
SUBWOOFER BYPASS
REMOTE INDICATOR CIRCUIT CLOSED WHEN SUB BYPASSED
POLARITY &
INPUT SENSITIVITY ACTIVE
PROCESSED SIGNAL
across the tip/sleeve when the internal relay is
open, and a maximum 1 amp of current when
the relay is closed.
CAUTION:
There is an
internal 1A fuse to protect
the
REMOTE INDICATOR
circuit. Exceeding 1A of cur-
rent may blow the internal
1A fuse.
