background image

P E A V E Y   E L E C T R O N I C S

Black Widow

®

 BWX

 

Weather Resistant 

Woofers

1808-8 SPS BWX WR - 03609660

1

508-8 SPS BWX WR - 03609650

1208-8 SPS BWX WR - 03609640

1

008-8 HE BWX WR - 03609800

The revolutionary weather resistant 

BWX WR series of woofers have been 

designed to perform at peak levels in 

outdoor environments.  
The series includes 10”, 12”, 15” and 

18” models with 8 ohm impedance. 

DESIGN

The BWX series uses a cone that is 

a variation on the existing Kevlar

®

 

impregnated cones used on all Black 

Widows. This cone is stronger and 

tougher, highly weather resistant, and 

has a specially designed surround. 

The dust cap is also made of the 

same extremely strong material.
Voice coil assemblies on the weather 

resistant drivers use the thermoset 

insulated aluminum or copper rib-

bon wire, bonded onto an incredibly 

durable, heat resistant polyimide 

composite former. The coil wires are 

solderless diffusion welded to high 

conductivity OFHC copper foil leads, 

which are embedded inside the for-

mer assembly and soldered to the 

tinsel leads with high temperature 

silver solder. The solder joint is then 

coated with a special thermally con-

ductive silicone adhesive for encap-

sulation and heat dissipation.
The voice coil assembly is bonded to 

the weather resistant cone and super 

tough nylon composite spider using a 

thermoset epoxy originally developed 

for attaching nose cones to ICBM 

missiles – truly an aerospace grade 

adhesive. The spider and surround 

are bonded to the frame with a high 

strength toughened adhesive.
For best performance results use 

BWX magnet structures. The BWX 

WR series replacement baskets will 

fit on standard BW magnet struc

-

tures, however the optimal power 

handling capacity will be compro-

mised. 
These weather resistant drivers adhere 

to the familiar features of Black Widow 

products: cast aluminum frames, re-

placeable basket assemblies, Rubatex 

gaskets and high reliability, spring 

loaded terminals are all used.

Содержание 1808-8 SPS BWX WR









Отзывы: