background image

Mackie d.2 FireWire card installation, page 3 of 4

5.  The installer will display a screen with information 

on the installation and prompt you to continue. Click 
NEXT to begin installing the driver package.

6.  You should see a small 

window indicating that 
the installer is running:

7.  If you are prompted with an impertinent message 

that the driver software has not passed Windows Logo 
Testing, click CONTINUE ANYWAY.

8.  Once the installer has prepared the system, you will 

be prompted with a window to “connect devices and 
turn them on.” NOW you can connect your DJ Mixer 
FireWire card to your PC using a FireWire cable. Once 
you have done this, click NEXT.

9. Windows 

should 

indicate that 
it has detected 
the Mackie DJ 
FireWire option 
card.

10.  You may be prompted again by Windows to confi rm 

the installation of driver fi les for the WDM portion of 
the audio driver. Click CONTINUE ANYWAY to com-
plete the installation.

11. Windows 

should indi-
cate that it 
has detected 
the WDM 
audio driver for the Mackie DJ Mixer FireWire card.

12.  The installer will display a window confi rming suc-

cessful completion of the installation procedures. 
Click EXIT to complete the installation and exit the 
installer.

13.  You will be prompted to re-start your computer to 

allow the changes to take effect. Re-start your PC to 
enjoy the fruits of your labor.

Control Panel Details

The CD which came with your FireWire card contains in-

formation regarding the PC control panel for the d.2 FireWire 
card. This allows you to adjust some advanced settings and the 
sample rate for some Windows applications. 

Note:

 The maxi-

mum recording sample rate is 96 kHz. If the sample rate is set 
to 176.4 or 192 kHz, you can playback, but not record.

Disclaimer

While every attempt has been made to make sure the infor-

mation on this instruction sheet is correct, there is always a 
chance that things may change. Please check out our website 
regularly, just in case updated instructions and PC drivers are 
available: www.mackie.com

Technical Support

If you have any questions about your d.2 FireWire card, 

please call Tech Support at 1-800-898-3211, 7 am to 5 pm PST. 

Service and repair details for the FireWire card are the same 

as explained in the d.2 owner's manual on page 18 and 19.

Отзывы: