background image

C200/SRM350

Bracket Kit Installation Instructions

This Bracket Kit allows the C200 and SRM350 loudspeakers to be flown in an overhead rigging system. The kit contains 

all the necessary hardware to suspend one loudspeaker vertically. You will need two Bracket Kits to suspend a loudspeak-
er horizontally.

WARNING: DO NOT USE THIS BRACKET KIT ON ANY LOUDSPEAKER OTHER THAN THE C200 AND SRM350.

 

Suspending anything, especially overhead of people, should be done with extreme caution. Always engage the services of 
a certified professional who is qualified to determine the requirements for, and to implement, overhead rigging. Only per-
sons with the knowledge of proper hardware and safe rigging techniques should attempt to suspend loudspeaker systems 
overhead. 

Failure to follow these precautions may result in equipment damage, injury, or death.

Tools Required:

One Phillips screwdriver
One 4 mm Allen head wrench

C200 and SRM350 Bracket Kit (Part No. 0016404)
Parts List

Item 

Part No. 

Qty 

Description

0015701 

Bracket, Hanging SRM350

0016416 

Screw, M5 x 12mm, Lg Blk

0016417 

Washer, Split Lock, M5 Blk

0010024 

Washer, Flat, M5 Blk

0015629 

Eyebolt, M10

105056   

Washer, Flat, M10 Blk

105058   

Washer, Split Lock, M10 Blk

0016429 

Nut, Hex, M10

 

0016401 

Instruction Sheet (this sheet, not shown)

Suspending the loudspeaker vertically: 

1.  Remove handle by unfastening the 4 flat head 

screws from the top of the loudspeaker. Retain 
the handle and screws for possible future 
installation. 

2.   Position the Bracket (A) onto the top of the 

loudspeaker.  

3.  Insert the 4 Screws (B), Lock Washers (C) 

and Flat Washers (D) thru the outer mounting 
holes of the Bracket, into the threaded inserts 
in the loudspeaker and tighten. Use a 4 mm 
Allen head wrench.


Отзывы: