Mack V-MAC IV, Руководство оператора

Страница: 89 / 133

V-MAC Co-Pilot Operator's Manual 81
CO-PILOT® OPERATIONS
This chapter is intended as a general overview to operations.
Using the Co-Pilot®
Note:
Turn the ignition key to the ON
position before operating the Co-Pilot®.
When the ignition key is turned to the ON position, the Co-Pilot® automatically
turns on. The MACK Logo Intro screen appears for several seconds and is usually
followed by the last Anytime screen that was active prior to power-down. If Vehicle
Management and Control (V-MAC) IV is programmed to “get driver” at key-on, then
the CHANGE DRIVER screen will appear. Messages on the screen will prompt the
driver to press the
Enter (
↵ ↵ ↵
) button to accept the driver ID or use the Co-Pilot®
stalk switch to enter a password.
Remember to press and hold the Enter (
↵ ↵ ↵
) button before beginning a trip to make the
stationary MAIN MENU screen appear.
Note: If the screen is black, press the Enter ( ↵ ↵
↵
) button on the stalk switch to turn it on.
Note: It is also possible to retrieve engine hours and odometer readings with the
ignition OFF; simply press and hold the Enter ( ↵ ↵
↵
) button on the stalk switch.
https://truckmanualshub.com/