Mack TerraPro LEU 2010 Скачать руководство пользователя

Страница: 86 / 225

PRE-TRIP INSPECTION AND DAILY

MAINTENANCE 75

• Check slack adjuster and chamber pushrod travel for proper brake
adjustment.

Condition of Front Axle and Steering System, Left Side

• No loose, worn, bent, damaged or missing parts.

Engine Compartment, Left Side

• Check coolant hose condition.

• Check condition of fan drive belts.

• Check engine and surrounding areas for coolant, oil and fuel leaks.

• Check wiring harnesses for signs of damage.

Engine Compartment, Right Side

• Check condition of coolant and heater hoses.

• Check condition of fan drive belts.

• Check engine and surrounding areas for coolant, oil and fuel leaks.

• Check fuel separator sight glass and drain if necessary. Check for leaks.

• Check wiring harnesses for signs of damage.

• Check air filter with brackets and hoses for loose connections or damage.
Check filter gauge, if mounted on the filter.

Step 2: Front of Cab Area

Condition of Windshield

• Check for damage and clean if dirty.

• Check windshield wiper arms for proper spring tension.

• Check wiper blades for any damage, "dead" rubber and attachment to arm.

Lights and Reflectors

• Lower cab and inspect parking, clearance and identification lights on cab.
They should be clean, operating and of the proper color.

• Reflectors clean and proper color.

• Turn on headlights. High and low beams should be operating and lenses
clean. If equipped, check daytime running lights.

Содержание TerraPro LEU 2010


































































































































































































































Результаты поиска

Содержание TerraPro LEU 2010

Отзывы:

Похожие инструкции для TerraPro LEU 2010

Бренды по названию

Популярные бренды

Mack TerraPro LEU 2010, Руководство оператора

Результаты поиска

Содержание TerraPro LEU 2010

Отзывы:

Похожие инструкции для TerraPro LEU 2010

Бренды по названию

Популярные бренды