Mack Granite GU Series, Руководство оператора

Страница: 94 / 317

INSTRUMENTS AND CONTROLS 83
• Automatic Traction Control Switch/Heavy Mud/Snow – Activate for
increased traction control in heavy mud or snow. (See “Automatic Traction
Control (ATC) (If Equipped)”, page 166 in the
Operation section of this manual
for more details.) When the operator presses the top of the rocker switch, the
heavy mud/snow function ATC indicator lamp blinks continuously. The ATC
lamp stops blinking when the ATC mode switch is pressed again or ignition
key cycled.
CAUTION
Be sure to deactivate the heavy mud/snow function when no longer needed.
Continued with the heavy mud/snow function active will result in vehicle damage.
If after a reasonable amount of time (no more than five minutes) the vehicle is still
not passive, deactivate the ATC and put on chains.
• Body Warning Lamp – The Body Lamp illuminates a RED warning icon
on the "D" panel to alert the driver of a body function as defined by the
bodybuilder. As an example, the body warning lamp will illuminate to alert the
driver that the dump body is not fully down.
C0029214
• Daytime Running Lights (DRL) Override Switch – Daytime Running
Lights (DRL) come standard on all MACK vehicles and can be optioned
with or without an override switch. When the DRL override switch has
been specified, different conditions can be selected that cause the DRL to
automatically activate, DRL can be automatically turned on when the parking
brake is released, the engine is running or both. Only one of these choices
may be selected. Using DRL will illuminate the low beam headlamp bulbs at
a slightly reduced intensity. The DRL function will monitor high beams as
well. If the high beams are activated, the DRL will be temporarily turned off
until high beam use ceases.