MachineryHouse C6246, Инструкция по эксплуатации

Страница: 36 / 89

39
obstacles.
1-3 Caution during operation:
1) Temperature of bearings.
Touch the main bearing by hand and feel the temperature is normally or not.
2) Temperature of motor:
Feel the temperature of motor bearing at the case of full load.
3) Noise and vibration:
If you find the noise and vibration of the machine are abnormal or irregular. Stop
the machine immediately for inspection and adjustment.
4) Quality of products:
If you discover the quality of products is out of limit, stop the machine at once for
finding the causes of defects.
5) Safety affairs:
a. Must stop operation when you leave the machine.
b. When changing main spindle speed or feeding speed stop running first.
c. All tools and products are strictly not allowing to be left on sliding surface of bed.
1-4 Check after operation:
1) Cleaning and collection of all tools:
All tools should be kept clean first then put back to original position (tool cabinet).
2) Proper position of tailstock, carriage & tool holder:
Tailstock, carriage & tool holder should be placed to proper position.
3) Clean-up of machine:
All of the oily matters, chips etc, on the machine should be removed completely
and put a thin lubricating oil on the sliding surface of machine to prevent the
corrosion.
2. Weekly Inspection:
1) Lubricating system:
Clean up the whole lubricating system and replenish with fresh lubricating oil.
2) Cooling system:
Clean up the whole cooling system and replenish with new cooling oil.
3) Transmission system:
Check the damage of rubber V-belt and readjust the tensile strength of V-belt.
3. Monthly Inspection:
1) Dismantle and clean all the dust, chips and foreign matter from moving parts.
2) Electrical system:
Carefully examine the connection of all electrical wires, terminals and switches,
Page 36 Instructions Manual for CL-60A (L604) 07/09/2017